Feinwerkbau p70. Feinwerkbau P70 conversion to 16 Joule / 12 fpe for Field Target

Price of a Feinwerkbau P70 Field Target ~ Air Rifle SA Forums

Feinwerkbau p70

I really don't like the look of the Steyr, I have held one before and like the S 200 Target it feels to small for me, might just be in my head. I put the Trager with barrel and all in the mill and took a 5mm end mill to do the job. The last option is currently the one I favour most. A little turn can give a big change in velocity. Trigger Takeup: Turning screw 13 to the right will increase trigger slack.

Next

CN 80 Feinwerkbau P70

Feinwerkbau p70

It may just be the ultimate Field Target rifle available today. For the average I exclude the first 33mm group because this was used to adjust the scope. Cocking the gun again resets the trigger and it is ready for continued practice or loading and shooting. Where your 603jr leaves off just imagine the added distance you will be able to shoot those tiny one hole groups. Also probably to open it further and longer to get more air behind the pellet. Unless you are a dial turner, I recommend you get a scope with mildot or similar reticle.

Next

Feinwerkbau Modell

Feinwerkbau p70

Feinwerkbau P70 Field Target mounted in the Feinwerkbau 700 Aluminium Stock The P70 is still on the light striker, strikerspring and the valve return spring. Adding extra springs is a piece of cake. I made new holes in the aluminum hamster to move the clamp forward while the hamster stays in the rear postion to cover the system block. Dr Beeman dubbed them the 'Mark 2' - never a designation used by Feinwerkbau itself, which labelled them the 'Kurz' short or 'Junior' model. You would need to find a used one for sale. But it could also result in inacurracy because of the fact the valve opens too long. First Stage Trigger Weight: Turning the knurled ring 10 to the left will increase the first stage weight.

Next

Feinwerkbau Serial Numbers

Feinwerkbau p70

As this makes it necessary to open the reg it would mean I would loose the current pressure setting. Adapter and a tench external regulator are fitted. Good enough for me: 15,4 Joule. Simply unscrew the reservoir and slide it forward to remove it from the rifle. Same for installing it back with the short latch in place. .

Next

Feinwerkbau P70

Feinwerkbau p70

To prevent this you just need to cock the rifle before screwing on a cylinder. P70 regulator adjustment screw This regulator set screw also has a coarse threading like the striker spring setscrew. Dear Gilberto, Thank you for your question. Haguen McLeod Hi, did you have to apply some lock to the regulator screw the golden screw after turning it? The Absorber tube contains a weight that is pushed backwards by the air that also propels the pellet forward. Good luck, Sven Translation to Portugese by Google Translate: Caro Gilberto, Obrigado por sua pergunta. The old o-ring stayed in place. I had ordered new belleville springs so my thoughts now were to add some to the reg.

Next

Feinwerkbau P70 For Sale

Feinwerkbau p70

Drop in 2 disc springs and close again. The weather was nice and calm with a temperature of 10 degrees Celsius and no wind at all. There seems to be no agreement on the number of extra springs on the internet. And mine does not change in power. The extreme spread over 10 shots was 1. I solved the problem in a quick and maybe not too good looking way at first. In order to reproduce factory setting, cock rifle and turn screw 14 clockwise slowly until trigger releases.

Next